Send Message

HT-IQ Silicon Flush Pressure Sensor Flush Diaphragm Pressure Transmitter 50.4mm

Basic Information
Place of Origin: Baoji,China
Brand Name: HT SENSOR
Certification: CE,RoHs,ISO9001
Model Number: HT-IQ
Minimum Order Quantity: 1
Price: Negotiable
Packaging Details: Standard Export Package
Delivery Time: 5-8 work days
Payment Terms: Western Union, L/C, T/T
Supply Ability: 5000PCS/Month
Detail Information
Model NO.: HT-IQ Range: 0-35kpa~3.5Mpa
Wiring Type: Gold-plated Kovar Pins Or 4 Wires Measuring Medium: Air And Liquid Clamp
Dia: 50.4mm Output: Analog 100mv+-30mv
Power: 1.5mA Type: Flush Diffused Silicon Pressure Sensor
Material: 316L Stainless Steel Thread: 50.4mm
High Light:

HT-IQ Silicon Flush Pressure Sensor


50.4mm Silicon Flush Pressure Sensor


Flush Diaphragm Pressure Transmitter 50.4mm

Product Description

HT-IQ Silicon Pressure Sensor For Liquid Test With 50.4mm Clamp Connection

HT-IQ  Piezoresistive Silicon Pressure Sensor

Introduction of flush silicon pressure sensor: 


HT - IQ pressure sensor is a flush diffusion silicon diaphragm pressure sensor. Clamp pressure sensor with disposable silicone oil filling technology. The pressure felt by the diaphragm is transmitted to the pressure chip through the silicone oil, and the compensation circuit corrects the pressure signal to a linear electrical signal. Clamp mask is pressed directly to prevent scaling, unsanitary and sticking. Widely used in food, medicine, alcohol and other health industries and generally suitable for measuring media may be contaminated occasions. Flat diaphragm with clamping structure, easy to install and remove, easy to clean.

HT-IQ Silicon Flush Pressure Sensor Flush Diaphragm Pressure Transmitter 50.4mm 0HT-IQ Silicon Flush Pressure Sensor Flush Diaphragm Pressure Transmitter 50.4mm 1

Product  Features of flush silicon pressure sensor:
  1. Advanced technology and 316L stainless steel housing packaging
  2. Temperature compensation and zero point correction through thick film
  3. circuit Outstanding reliability, repeatability, and stability
  4. High-temperature flush diaphragm structure for easy cleaning
Electrical performance of flush silicon pressure sensor:
  1. Power Supply:        ≤2mA DC (Typical 1.5mA DC)
  2. Input Impedance  :     2.5KΩ~6KΩ
  3. Output Impedance:     2.5KΩ~6KΩ
  4. Electrical Connection: Gold-plated Kovar pins or 100mm high-temperature wires.
Performance Parameters of flush diffused silicon pressure sensor:
Measurement Range Gauge(G) 35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa
Absolute(A) 100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA
Sealed(S) 3500KPaS
  Typ Max Unit
NonLinearity   ±0.15 ±0.3 %F.S
Repeatability  0.05 0.1 %F.S
Hysteresis    0.05 0.1 %F.S
Zero Offset Output   0±1 0±2 mV
Full Scale Output   ≤20KPa 50±10 50±30 mV
≥35kPa 100±10 100±30 mV
Zero Offset Temp. Drift ≤20KPa ±1 ±2 %F.S
≥35kPa ±0.5 ±1 %F.S
Full Scale Temp. Drift ≤20KPa ±1 ±2 %F.S
≥35kPa ±0.5 ±1 %F.S
Compensated Temp. ≤20KPa 0~50 ºC
≥35kPa 0~70 ºC
Operating Temperature   -20~80 ºC
Storage Temperature  -40~125 ºC
Allowable Overload Take the smaller value between 3 times the full scale or 120MPa  
Burst Pressure 5X the full scale  
Long-term Stability 0.2 %   F.S/Year
Diaphragm Material 316L  
Insulation Resistance ≥200MΩ 100VDC  
Vibration No change under conditions of 10gRMS, 20Hz to 2000Hz  
Shock 100g,11ms  
Response Time ≤1ms  
O-ring Seal Nitrile rubber or Fluoro rubber  
Filling Medium Silicon Oil  
Weight ~220g  
The parameters are tested under the following conditions:  1.5mA @25°C
Outline Construction
HT diffused silicon oil-filled pressure sensor

Electrical connection and compensation
HT diffused silicon oil-filled pressure sensor
Selection Examples
HT diffused silicon oil-filled pressure sensor
Ordering tips
1. Pay attention to the fit between the core size and the transmitter housing during assembly to achieve the         
     required airtightness
2. During the assembly of the housing, ensure it is aligned vertically and apply even pressure to avoid jamming or damaging the compensation plate.
3. If the measured medium is not compatible with the core diaphragm and the housing material (316L), special instructions should be provided when      placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage to the core due to diaphragm deformation or piercing.
5. Keep the pressure port of the gauge pressure core open to the atmosphere and prevent the entry of water, water vapor, or corrosive media into          the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on the actual core for reference.

HT diffused silicon oil-filled pressure sensorHT diffused silicon oil-filled pressure sensorHT diffused silicon oil-filled pressure sensorHT diffused silicon oil-filled pressure sensor
1.Q: What are the features of your pressure sensor transmitters?
   A: High precision, durability, and excellent performance. Customization available.
2.Q: Can I customize special specifications?
   A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service
3.Q: What is your production capacity?
    A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling
4.Q: What's the typical delivery period?
    A: 5~8 working day for standard models. Customized products may vary.
5.Q: How are the products priced? Any discounts?
    A: Competitive pricing with discounts for bulk orders or long-term partners
6.Q: What is the warranty of your products? And after-sales service?
    A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote          instruction by PC network is always available.

Contact Details
Lisa zhuang

Phone Number : +8618791975539

Whatsapp : +8618629200449