HT20V Diffused Silicon Pressure Sensor 10VDC Piezoresistive Differential Pressure Sensor Cell
Product Details
| Model NO.: | HT20V | Wiring Type: | Four-Wire |
|---|---|---|---|
| Measuring Medium: | Gas And Liquid | Customized: | Customized |
| Power: | 10VDC | Transport Package: | Carton |
| Type: | Differential Piezoresistive Pressure Sensor | Output Signal Type: | Analog Type |
| Material: | Stainless Steel | Customization: | Available | Customized Request |
| Highlight |
HT20V Diffused Silicon Pressure Sensor,Diffused Silicon Pressure Sensor 10VDC,10VDC Piezoresistive Differential Pressure Sensor |
||
Product Description
HT20V 10VDC Differential Diffused Silicon Pressure Sensor for differential pressure test
Introduction of differential diffused silicon pressure sensor:
HT20V is a differential pressure sensoris a differential pressure sensitive device isolated by stainless steel double corrugated diaphragm. Precise measurements are achieved by isolating the diaphragm and filling the silicone oil to the silicon pressure sensitive element. The sensor adopts the international advanced silicon pressure chip with high stability and high precision, and adopts the sintered base designed by stress optimization. The production process of the sensor includes: patch, gold wire bonding, film welding, high vacuum oil injection, pressure circulation stress relief, high temperature aging, temperature compensation, etc. The shape, size and sealing method of the general products are consistent with the international mainstream products of the same kind, and the interchangeability is good. They are widely used for differential pressure and level measurement in 316L stainless steel compatible media.
Product Features of differential diffused silicon pressure sensor:
- Stable and reliable performance
- High resistance to static pressure
- Cost-effective
- Differential pressure detectiony
- Pressure calibration instruments
- Liquid level measurement
- Power Supply: ≤10VDC
- Common Mode Voltage Output: 50% of the input (typical)
- Input Impedance:4KΩ~20KΩ
- Output Impedance:2.5KΩ~6KΩ
- Electrical Connection:100mm high-temperature wire.
| Performance Parameters of differential diffused silicon pressure sensor: | ||||
| Measurement Range | 10KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa | |||
| Typ | Max | Unit | ||
| Linearity | ±0.15 | ±0.3 | %F.S | |
| Repeatability | 0.05 | 0.1 | %F.S | |
| Hysteresis | 0.05 | 0.1 | %F.S | |
| Zero Offset Output | 0±1 | 0±2 | mV | |
| Full Scale Output | ≤20KPa | 50±1 | 50±2 | mV |
| ≥35kPa | 100±1 | 100±2 | mV | |
| Zero Offset Temp. Drift | ≤20KPa | ±1 | ±2.5 | %F.S |
| ≥35kPa | ±0.8 | ±1.5 | %F.S | |
| Full Scale Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.8 | ±1.5 | %F.S | |
| Compensated Temp. | ≤20KPa | 0~50 | ºC | |
| ≥35kPa | 0~70 | ºC | ||
| Operating Temperature | -20~80 | ºC | ||
| Storage Temperature | -40~125 | ºC | ||
| Allowable Overload | Take the smaller value between 3 times the full scale or 4MPa | |||
| Burst Pressure | 5X the full scale | |||
| Long-term Stability | 0.2 % | F.S/Year | ||
| Diaphragm Material | 316L | |||
| Insulation Resistance | ≥200MΩ 100VDC | |||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | |||
| Shock | 100g,11ms | |||
| Response Time | ≤1ms | |||
| O-ring Seal | Nitrile rubber or Fluoro rubber | |||
| Filling Medium | Silicon Oil | |||
| Weight | ~45g | |||
| The parameters are tested under the following conditions: Constant voltage of 10V and ambient temperature of 25ºC | ||||
| Outline Construction of differential diffused silicon pressure sensor | |
| Dimension |  |
| Notes:The outgoing end is the positive terminal. If there are any changes in the wire colors, please refer to the label attached to the sensor for accurate information | |
| Electrical connection and compensation of differential diffused silicon pressure sensor |
|
| Selection Examples |
| Ordering tips |
required airtightness
2. During the assembly of the housing, ensure it is aligned vertically and apply even pressure to avoid jamming or damaging the compensation plate.
3. If the measured medium is not compatible with the core diaphragm and the housing material (316L), special instructions should be provided when placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage to the core due to diaphragm deformation or piercing.
5. Keep the pressure port of the gauge pressure core open to the atmosphere and prevent the entry of water, water vapor, or corrosive media into the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on the actual core for reference.
| company |
| Q&A |
.
.
Product Highlights
HT20V 10VDC Differential Diffused Silicon Pressure Sensor for differential pressure test Introduction of differential diffused silicon pressure sensor: HT20V is a differential pressure sensoris a differential pressure sensitive device isolated by stainless steel double corrugated diaphragm. Precise ...
19mm Oil Filled Pressure Transmitter Diffused Sillcon Pressure Transmitter Water Oil Test
Oil Filled Diffused Sillcon Pressure Transmitter Sensor For Water And Oil Test 19mm Silicon Piezoresistive Pressure Sensor Introduction of Pressure Transmitter Sensor: HT19F functions as a silicon piezoresistive pressure sensor ,with a core consisting of a highly stable diffused silicon element,. It ...
OEM Water Oil Flush Diaphragm Pressure Transmitter Beverage Digital Level Pressure Sensor
BP93420-IIIQT1 OEM water oil Beverage glue Flush Diaphragm Pressure Sensor Transmitter BP93420-IIIQT1 Pressure Transmitter Introduction of flush diaphragm pressure sensor: BP93420-IIIQT1 flush-diaphragm pressure sensor transmitter is an analog pressure transmitter with a flat membrane structure, ...
BPHT24-III Digital Pressure Transmitter Flush Diaphragm Digital Pressure Sensor
Hengtong BPHT24-III Digital Flush diaphragm pressure sensor Transmitter China BPHT24-III Pressure Transmitter Introduction of flush diaphragm pressure sensor transmitter: BPHT24-III pressure transmitter is mainly used in the pressure measurement of viscous liquid mud anti-scaling and anti-crystalliz...
BPZK04-2 Pressure Switch Electrical 24VDC 4-20mA Digital Pressure Switch LCD Display Electronic Pressure Switch
24Vdc 4-20MA 2-Point Electronic Pressure Switch Digital Pressure Switch With LCD Display BPZK04-2 Electronic Pressure Switch Introduction: BPK-ZK04-2 electronic pressure switch is a set of pressure measurement, control display, transmission output as one of the full digital control products. It can ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
