HT19 Piezoresistive Silicon Pressure Sensor Cell For High Accuracy Measurement Sensor Pressure
Product Details
| Material: | 316L | Min Range: | 10kpa |
|---|---|---|---|
| Max Range: | 60MPa | Supply: | 1.5mA (0.4-2.0mA) |
| OEM: | YES | Selectable: | Gold-plated Pin Or Four-color Silicone Wire |
| Model: | HT19 | High: | 12mm /15mm |
| Oil: | Difusion Silicon | Thread: | No |
| Highlight |
Piezoresistive Silicon Pressure Sensor Cell,High Accuracy Silicon Pressure Sensor,HT19 Piezoresistive Silicon Pressure Sensor |
||
Product Description
HT19 Piezoresistive Silicon Pressure Sensor Cell For High Accuracy Measurement Sensor Pressure
HT19 Silicon Pressure Sensor
Introduction of oil filled silicon pressure sensor:
Advanced Stress-Optimized Design
- The sensor utilizes an optimized stress design in the sintered base, providing enhanced stability and precision.
- Cutting-edge SMT (Surface Mount Technology), gold wire bonding, and diaphragm welding processes are employed to ensure reliable performance.
- High-vacuum coating, pressure cycle stress elimination, and high-temperature aging treatments further improve the sensor's stability and repeatability.
Product Features of oil filled silicon pressure sensor:
- Wide measurement range:0~10KPa~100Mpa
- Piezoresistive silicon sensing element
- Full316LSS,Full Titanium or Hastelloy diaphragm
- O-ring mount
- High Accuracy and stability.
Applications of oil filled silicon pressure sensor:
- Measurement pressure of gas and liquid
- Petroleum exploitation
- Water supply,warm supply of town
- Process control system
- Aviation and navigation inspection
- Hydraulic pressure
Electrical Data of silicon Pressure sensor
- Supply:1.5mADC
- Input impedance:3KΩ~6KΩ
- Output impedance:2.5KΩ~6KΩ
- Insulation resistance:≥100MΩ/50VDC
- Insulation voltage:500VAC between the housing and electrical connection will not cause damage
- Medium compatible: liquid, gas compatible with 316L stainless steel
Performance Specification of oil filled silicon Pressure sensor
| Performance Parameters: | |||||
| Measurement Range | Gauge(G) | 10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa | |||
| Absolute(A) | 100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA | ||||
| Sealed(S) | 3500KPaS,7MPaS,10MPaS,20MPaS,40MPaS,60MPaS,100MPaS | ||||
| Typ | Max | Unit | |||
| Linearity | ±0.15 | ±0.3 | %F.S | ||
| Repeatability | 0.05 | 0.1 | %F.S | ||
| Hysteresis | 0.05 | 0.1 | %F.S | ||
| Zero Offset Output | 0±1 | 0±2 | mV | ||
| Full Scale Output | ≤20KPa | 50±10 | 50±30 | mV | |
| ≥35kPa | 100±10 | 100±30 | mV | ||
| Zero Offset Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S | |
| ≥35kPa | ±0.5 | ±1 | %F.S | ||
| Full Scale Temp. Drift | ≤20KPa | ±1 | ±2 | %F.S | |
| ≥35kPa | ±0.5 | ±1 | %F.S | ||
| Compensated Temp. | ≤20KPa | 0～50 | ℃ | ||
| ≥35kPa | 0～70 | ℃ | |||
| Operating Temperature | -20～80 | ℃ | |||
| Storage Temperature | -40～125 | ℃ | |||
| Allowable Overload | Take the smaller value between 3 times the full scale or 120MPa | ||||
| Burst Pressure | 5X the full scale | ||||
| Long-term Stability | 0.2 % | F.S/Year | |||
| Diaphragm Material | 316L | ||||
| Insulation Resistance | ≥200MΩ 100VDC | ||||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||||
| Shock | 100g,11ms | ||||
| Response Time | ≤1ms | ||||
| O-ring Seal | Nitrile rubber or Fluoro rubber | ||||
| Filling Medium | Silicon Oil | ||||
| Weight | ～28g | ||||
| The parameters are tested under the following conditions: Constant current of 1.5mA and ambient temperature of 25°C | |||||
Dimension
NOTE:
1. During assembly, pay attention to the coordination of the core size and the transmitter housing to achieve the required air tightness.
2. During the housing assembly process, ensure that it is vertically aligned and apply even pressure to avoid jamming or damaging the compensation plate.
3. If the medium under test is incompatible with the core diaphragm and housing material (316L), special instructions should be provided when placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects to avoid deformation or puncture of the diaphragm and damage to the core.
5. Keep the pressure port of the gauge core open to the atmosphere to prevent water, water vapor or corrosive media from entering the negative pressure chamber of the gauge core.
6. If there is any change in the pin, please refer to the label on the actual product.
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance. Customization available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service.
3. Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling.
4. Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may vary.
5. Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term partners.
6. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
Product Highlights
HT19 Piezoresistive Silicon Pressure Sensor Cell For High Accuracy Measurement Sensor Pressure HT19 Silicon Pressure Sensor Introduction of oil filled silicon pressure sensor: Advanced Stress-Optimized Design The sensor utilizes an optimized stress design in the sintered base, providing enhanced ...
