12mm Diffused Silicon Pressure Sensor with TO8 Encapsulation and Analog Output for Gas Measurement
Product Details
| Model NO.: | HT12 | Output Signal: | Analog Type |
|---|---|---|---|
| Material: | Stainless Steel | Wiring Type: | Four-Wire |
| Measuring Medium: | Gas | IP Rating: | IP65 |
| Pressure Range: | 10kpa~200kpa | Output Signal: | MV Signal |
| Power Consumption: | 1.5mA | Nonlinearity: | 0.2%FS |
| Size: | 12mm | Input Impedance: | 3KΩ~6KΩ |
| Output Impedance: | 2.5KΩ~6KΩ | Operating Temperature: | -20~80ºC |
| Storage Temperature: | -40~125ºC | Weight: | ~12.5g |
| Highlight |
12mm Pressure Sensor,TO8 Encapsulation Silicon Pressure Transmitter,Analog Output Diffused Silicon Sensor |
||
Product Description
- Wide measurement range: 0~10KPa~2MPa
- High reliability and excellent stability
- TO8 encapsulation technology
- Aerospace-grade applications
- Measurement of dry, non-corrosive gas pressures
- Pneumatic control systems
- Biomedical engineering for medical applications
- HVAC (Heating, Ventilation, and Air Conditioning) control
- Aerospace testing for aviation-related purposes
- Power Supply: ≤2mA DC (Typical 1.5mA DC)
- Input Impedance: 3KΩ~6KΩ
- Output Impedance: 2.5KΩ~6KΩ
- Electrical Connection: Gold-plated Kovar pins or 100mm high-temperature wires
| Parameter | Typ | Max | Unit |
|---|---|---|---|
| Linearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Offset Output | 0±1 | 0±2 | mV |
| Full Scale Output (≤20KPa) | 50±10 | 50±30 | mV |
| Full Scale Output (≥35kPa) | 100±10 | 100±30 | mV |
| Zero Offset Temp. Drift (≤20KPa) | ±1 | ±2 | %F.S |
| Zero Offset Temp. Drift (≥35kPa) | ±0.5 | ±1 | %F.S |
| Full Scale Temp. Drift (≤20KPa) | ±1 | ±2 | %F.S |
| Full Scale Temp. Drift (≥35kPa) | ±0.5 | ±1 | %F.S |
| Compensated Temp. (≤20KPa) | 0~50 | - | ºC |
| Compensated Temp. (≥35kPa) | 0~70 | - | ºC |
| Operating Temperature | -20~80 | - | ºC |
| Storage Temperature | -40~125 | - | ºC |
| Allowable Overload | Take the smaller value between 3 times the full scale or 4MPa | ||
| Burst Pressure | 5X the full scale | ||
| Long-term Stability | 0.2 % F.S/Year | ||
| Diaphragm Material | 316L | ||
| Insulation Resistance | ≥200MΩ 100VDC | ||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||
| Shock | 100g,11ms | ||
| Response Time | ≤1ms | ||
| Weight | ~12.5g | ||
- Ensure proper fit between core size and transmitter housing for required airtightness
- Align housing vertically and apply even pressure during assembly to avoid damaging compensation plate
- Provide special instructions if measured medium is incompatible with 316L diaphragm material
- Avoid pressing sensor diaphragm with hands or sharp objects to prevent damage
- Keep gauge pressure port open to atmosphere and prevent entry of water or corrosive media
- Refer to actual core label for pin lead configuration
Product Highlights
HT12 12mm diffused silicon pressure sensor wafer. High stability, 0.2%FS nonlinearity, TO8 encapsulation. IP65 rated, measures gas pressure from 10kPa~2MPa. Custom options available for OEM/ODM.
19mm Oil Filled Pressure Transmitter Diffused Sillcon Pressure Transmitter Water Oil Test
Oil Filled Diffused Sillcon Pressure Transmitter Sensor For Water And Oil Test 19mm Silicon Piezoresistive Pressure Sensor Introduction of Pressure Transmitter Sensor: HT19F functions as a silicon piezoresistive pressure sensor ,with a core consisting of a highly stable diffused silicon element,. It effectively measures the pressure of liquids and gases by transmitting the pressure of the tested medium to the silicon diaphragm through an isolation diaphragm and silicon oil
OEM Water Oil Flush Diaphragm Pressure Transmitter Beverage Digital Level Pressure Sensor
BP93420-IIIQT1 OEM water oil Beverage glue Flush Diaphragm Pressure Sensor Transmitter BP93420-IIIQT1 Pressure Transmitter Introduction of flush diaphragm pressure sensor: BP93420-IIIQT1 flush-diaphragm pressure sensor transmitter is an analog pressure transmitter with a flat membrane structure, which increases the contact area with the medium. Wide temperature range, overload capacity, strong corrosion resistance, wide application. In order to ensure that this series of
BPHT24-III Digital Pressure Transmitter Flush Diaphragm Digital Pressure Sensor
Hengtong BPHT24-III Digital Flush diaphragm pressure sensor Transmitter China BPHT24-III Pressure Transmitter Introduction of flush diaphragm pressure sensor transmitter: BPHT24-III pressure transmitter is mainly used in the pressure measurement of viscous liquid mud anti-scaling and anti-crystallization oil shield machine. The whole adopts integrated stainless steel structure, and the two kinds of flat film structure with or without cavity can choose the material in contact
BPZK04-2 Pressure Switch Electrical 24VDC 4-20mA Digital Pressure Switch LCD Display Electronic Pressure Switch
24Vdc 4-20MA 2-Point Electronic Pressure Switch Digital Pressure Switch With LCD Display BPZK04-2 Electronic Pressure Switch Introduction: BPK-ZK04-2 electronic pressure switch is a set of pressure measurement, control display, transmission output as one of the full digital control products. It can be used as a signal device when the pressure of non-corrosive gases and liquids reaches a limit value, or as a circuit contact switch for a pressure regulator. The controller is
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
