quality 10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor factory

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor

Certification: RoHS

Minimum Order Quantity: 1

Price: 16

4 20ma Pressure Transducer

Product Details

Model NO.:	BP9325	For:	Diffused Silicon Pressure Transmitter
Output Signal Type:	Analog Type	Production Process:	Integration
Material:	Stainless Steel	Thread Type:	G Or NPT.etc
Wiring Type:	Four-Wire	Measuring Medium:	Gas And Liquid
IP Rating:	IP65	Customized:	Customized
Filling Medium:	Silicon Oil	Diaphragm:	SS316L/HC
Long-Term Stability:	+-0.1%F.S/Year(Typ.)	Compensation Temp.:	-10~70ºC
Transport Package:	Carton	Specification:	Customized
Trademark:	HengTong	Origin:	China
HS Code:	9026209090	Production Capacity:	50000PCS/Year
Highlight	10VDC pressure sensor for water , oil level sensor 10mv/v , pressure transmitter sensor with warranty

Product Description

10VDC 10mv/v pressure sensors for water and oil level test

BP9325 Silicon Piezoresistive Pressure Sensor

Introduction:

BP9325 silicon piezoresistive pressure sensor is a highly stable diffused silicon element. The differential pressure of the measured medium is transmitted to the silicon diaphragm through a 316L isolation diaphragm and silicone oil. By utilizing the piezoresistive effect of the diffused silicon, it
achieves the purpose of measuring the pressure of liquids and gases

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor 0

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor 1

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor 2

Product Features:
1. Utilizes advanced technology and 316L stainless steel casing, with materials
2. such as full titanium and Hastelloy diaphragm
3. Employs thick-film circuits for temperature compensation and zero-point correction
5. High reliability, repeatability, and stability
Applications:
1. Suitable for measuring the pressure of non-corrosive gases and liquids with 316L stainless steel
2. Applied in industrial on-site processes such as petroleum, chemical, metallurgy, power generation, and hydrology
3. Used in the marine and aviation industries
4. Hydraulic and pneumatic control systems
5. Process control
Basic Condition:
1. Power Supply: ≤2mADC (typical value 1.5mADC)
2. Input Impedance: 2.5KΩ~6KΩ
3. Output Impedance:2.5KΩ~6KΩ
4. Electrical Connection: Gold-plated Kovar pins or 100mm high-temperature wires

Performance Parameters:
Measurement Range		Gauge(G)	10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa
		Absolute(A)	100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA
		Sealed (S)	3500KPa,7MPa,10MPa,20MPa,40MPa,60MPa,100MPa
		Typ		Max	Unit
Linearity		±0.15		±0.3	%F.S
Repeatability		0.05		0.1	%F.S
Hysteresis		0.05		0.1	%F.S
Zero Offset Output		0±1		0±2	mV
Full Scale Output	≤20KPa	50±10		50±30	mV
	≥35kPa	100±10		100±30	mV
Zero Offset Temp. Drift	≤20KPa	±1		±2	%F.S
	≥35kPa	±0.5		±1	%F.S
Full Scale Temp. Drift	≤20KPa	±1		±2	%F.S
	≥35kPa	±0.5		±1	%F.S
Compensated Temp.	≤20KPa	0~50			ºC
	≥35kPa	0~70			ºC
Operating Temperature		-20~80			ºC
Storage Temperature		-40~125			ºC
Allowable Overload		Take the smaller value between 3 times the full scale or 120MPa
Burst Pressure		5X the full scale
Long-term Stability		0.2 %			F.S/Year
Diaphragm Material		316L
Insulation Resistance		≥200MΩ 100VDC
O-ring Seal		Nitrile rubber or Fluoro rubber
Vibration		No change under conditions of 10gRMS, 20Hz to 2000Hz
Shock		100g,11ms
Response Time		≤1ms
Filling Medium		Silicon Oil
Weight		~0.1kg
The parameters are tested under the following conditions: Constant current of 1.5mA and ambient temperature of 25°C

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor 3

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor 4

10VDC 10mv/v Pressure Sensors for Water And Oil Level Sensor 5

FQA

1.Q: What are the features of your pressure sensor transmitters?

A: High precision, durability, and excellent performance. Customization available.

2.Q: Can I customize special specifications?

A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service

3.Q: What is your production capacity?

A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling
.

4.Q: What's the typical delivery period?

A: 5~8 working day for standard models. Customized products may vary.

5.Q: How are the products priced? Any discounts?

A: Competitive pricing with discounts for bulk orders or long-term partners
.

6.Q: What is the warranty of your products? And after-sales service?

A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.